Hot Line:

0519-85071225

MOBILE WEB SITE

© ADIA Rubber & Plastic Material Co., Ltd.                                                                            Powered by www.300.cn Changzhou          ICP:苏ICP备05073397号    

 

Fax: 0519-85071220
Website: www.adia.cn
Email address: market@adia.cn

Telephone: 0519-85071225, 85071221,85071215
Mobile phone: 13601505859(Ms Pang)
                      13861240110(Mr Zhang)

Address: Area 2A, Science and Innovation Park, No. 128, Mingxin West Road, Wujin High-tech Zone, Changzhou city

PRODUCTS

>
Products
AF-200
产品名称

AF-200

没有此类产品
Describe

PE (polyethylene) odorless, non-toxic, waxy feel, excellent low-temperature resistance (the minimum operating temperature can reach - 70 ~ - 100 ℃), good chemical stability, resistance to most acid and alkali corrosion (not resistant to acid with oxidation property), insoluble in general solvents at room temperature, However, polyethylene is very sensitive to environmental stress (chemical and mechanical action) and has poor heat-resistant aging. At room temperature, it is resistant to hydrochloric acid, hydrofluoric acid, phosphoric acid, formic acid, amines, sodium hydroxide, potassium hydroxide and other chemicals. Nitric acid and sulfuric acid have strong destructive effect on polyethylene. Polyethylene is prone to photooxidation, thermal oxidation, ozone decomposition, and degradation under the action of ultraviolet light. Carbon black has excellent light shielding effect on polyethylene. After irradiation, the reaction of crosslinking, chain breaking and unsaturated group formation can take place.

NBR/PVC (rubber plastic) foaming, NBR (nitrile rubber) excellent oil resistance, high wear resistance, good heat resistance, strong adhesion. It also has good water resistance, air tightness and excellent bonding performance. It is widely used for making various oil resistant rubber products, various oil resistant washers, gaskets, sleeves, soft packaging, soft rubber tubes, printing and dyeing rubber rollers, cable rubber materials, etc. It is mainly used for making oil resistant products, commonly used for making various oil resistant molded products, such as O-rings, oil seals, cups, diaphragms, valves, bellows, etc., and also for making rubber plates and wear-resistant parts

Alos material has the characteristics of low thermal conductivity, which is used in the heat insulation project with high requirements. EPDM pipe and BNR / PVC plate have high resilience and are widely used in water heating and antifreeze.

Material
Science
Code Density
(Kg/m3)
Hardness
(Shore C)
Tensile strength
(Kpa)
Elongation at break
(%)
Characteristic Main purpose
PE AF-200 30±10 20±3 250±50 120±30 Light weight,low heat conduction,aging resistance Thermal insulation material and buffer material
NBR/PVC AN-200 75±10 - 330±50 220±50 Flame retardant, high rebound Thermal insulation material and buffer material
Alex ARMAFLEX 45±10 - - - Flame retardant, low thermal conductivity, aging resistance Thermal insulation material

 

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article